Toro zero turn mower problems include the mower weak on one side. Imagine you are trying to the level best, but the mower seems to be weak on one specific side.
But, why is a Toro zero turn mower weak on one side?
Because the brake is not responding, steering has defects, misadjusted traction unit, mismatched tire pressure, and dampers not working.
Not only these ones, there is still more to know. Because the Toro zero turn mower weak on one side has several causes and their fixes are elaborated in the article.
So, continue till the end to get the trifles.
Quick Overview: Toro Zero Turn Mower Weak On One Side?
To make your inspection quicker, I have included the reasons and remedies of a Toro zero turn mower weak on one side.
Go through the table to check them out.
| Serial | Reasons | Solutions |
| 1 | Brake not responding | Adjust the brake or replace it |
| 2 | Steering has defects | Check the steering wheel and adjust |
| 3 | Misadjusted traction unit | Adjust the traction correctly |
| 4 | Mismatched tire pressure | Match the pressure on each tire |
| 5 | Dampers not working | Change the dampers immediately |
Detailed Discussion: Toro Zero Turn Mower Weak On One Side?
Running a Toro zero turn mower depends on if each side of it works equally. Otherwise, if a Toro zero turn mower one side is not working, the mower feels like of no use.
To get the mower out of this issue, I have discussed the possible reasons and the ways of fixing them in this section.
Therefore, let me break them down for you.
Reason 1: Brake Not Responding
The brake on one side of a Toro zero turn mower can stop responding all of a sudden.
It is mostly recognized as a dragging brake causing the mower to stop working on one side. Well, the brake can be bad but in some cases, the adjustment of the brake needs retouch.
Solution: Adjust the Brake or Replace it
As I mentioned, readjustment is also a significant factor in the case of a brake. So, perform an inspection and adjust it accordingly. If the brake is completely bad, replace it without delay.
Reason 2: Steering Has Defects
Toro zero turn mower steering problems are a noteworthy reason in guiding the mower to be weak on one side.
The thing is, steering wheels can have issues and the steering shafts can feel the need of new adjustment. All these work together and you experience the mower is not steering on one side.
Solution: Check the Steering Wheel and Adjust
Adjustments are a must for keeping the Toro zero turn mower in a well working condition. That’s why adjust both the steering wheel and the shaft to run the mower without any barrier.
Reason 3: Misadjusted Traction Unit
The traction on a Toro zero turn mower has a great role in moving the mower. But, a misadjusted traction unit is not an efficient way.
In other words, when the adjustment on traction gets weak, it fails to function. Consequently, the effect of it lands on the mower’s moving capability.
Solution: Adjust the Traction Correctly
As you have learned about the traction, don’t leave it unchecked when one side of the mower doesn’t move. Follow the owner’s manual to step ahead with the traction’s adjustment correctly.
Reason 4: Mismatched Tire Pressure
The tires on a Toro zero turn mower have a demand of the same amount of pressure. Even the manufacturer has a recommendation for the pressure.
But, when you mismatch the pressure in the tires of each side, the tires can not move forward or reverse. Because it hinders them from moving.
Solution: Match the Pressure On Each Tire
As the reason has a noticeable impact on the mower’s movement, it requires much attention. That’s why match the pressure in each tire and check them twice for safety.
Reason 5: Dampers Not Working
The pulling forward or reverse of a Toro zero turn mower is much dependent on the dampers.
The dampers can get bad or damaged, or have several types of defects. These are red flags for them and the dampers gradually stop working.
Solution: Change the Dampers Immediately
Inspecting the dampers on a Toro zero turn mower, you can match my words. At that point, look no other way than changing the dampers quickly. Because without their actions, the mower won’t move that one side.
Why is My Toro Zero Turn Mower Slow on One Side?
Answer: A Toro zero turn mower slow on one side is caused by the less amount of fluid, and the fluid filter on that side can be dirty. If the freewheeling rod is in an irregular state, the mower will slow down.
What Causes the Toro Zero Turn Mower to be Weak on Left Side?
Answer: If the left side of the Toro zero turn mower is weak, check out the drum brake. The hydrostatic motor carrying air, dampers not responding, and the mower’s imbalanced condition are responsible, too.
Final Words
A Toro zero turn mower weak on one side is undoubtedly an event to get frustrated.
Because it doesn’t allow the rider to run the mower as one side seems to be stuck in one position. To get rid of it easily, do not forget to check out the tips mentioned in the article.