Scotts spreader settings conversion chart is indispensable to know which setting you should choose and why. If you are planning to fertilize your grass or vegetables, you must have a complete idea regarding the chart.
But, which spreaders are covered by Scotts spreader settings conversion chart?
The spreaders covered by Scotts spreader settings conversion chart are Scotts Drop Spreader, Scotts Rotary Spreader and Scotts Handy Spreader. It is because these are the best for three different sizes of lawns.
As Scotts offer different spreaders for different purposes, their settings also vary a lot. Settings conversion chart changes according to the spreader type and model.
Therefore, you will get the mostly seen chart and its description detailed below. The calibration process is also mentioned completely.
So, why don’t we dive into the niceties?
Quick Overview: Scotts Spreader Settings Conversion Chart
When you are buying a Scotts product for a particular purpose, you have to go through its spreader settings. These settings vary a lot in accordance with your lawn area also.
Therefore, you can have a glimpse of the chart to get better knowledge about it.
|Number||Types of Task||Rate (g/sq.m)||Scotts Drop Spreader||Scotts Rotary Spreader||Scotts Handy Spreader|
|1||Cut and Feed Lawn Food||30||5||26||5|
|2||Mow It Less||30||5||26||5|
|4||Natural Choice Lawn Food||35 to 50||7.25 to 8.25||29.5 to 31.5||5|
What Setting on Scotts Spreader for Grass Seed?
Spreading grass seeds with Scotts spreaders is totally a fun act as they spread them equally and avoids overspreading. But, the settings rate should be accurate according to different spreaders types.
Keeping that in mind, I have made a chart of Scotts spreader settings for grass seeds. The variants of grass seeds and the number of seeding actions also affect the settings. But, the settings remain close to the common ones.
So, let’s end the suspension and take a glance at the settings.
|Serial||Scotts Spreader Types||Settings for Grass Seed|
|1||Scotts Handy Spreader||1 or 2|
|2||Scotts Drop Spreader||6 or 7|
|3||Scotts Rotary Spreader||27|
|4||Scotts Wizz Spreader||7 or 8|
|5||Scotts Broadcast Spreader||15|
Scotts Spreader Setting for Lime
A Scotts spreader has particular settings for each type of product including the lime. Most importantly, lime shouldn’t be applied randomly as it can affect the lawn significantly.
So, check out the Scotts spreader setting for lime and follow them accordingly.
|Serial||Scotts Spreaders||Setting 30 pounds/1000 sq. ft.|
|1||Scotts Turf Builder||2|
|3||Scotts Basic Spreader||10|
|4||Scotts Turf Builder EdgeGuard Mini||10|
|5||Scotts Easy Green||27|
|6||Scotts Turf Builder Deluxe||10|
Scotts Spreader Settings for 10-10-10 Fertilizer
Scotts spreaders have several unique settings and these setting numbers are particularly used for the specific lawn care products. One of them is the 10-10-10 fertilizer which is considered the best solution to lawn problems.
As it is so good, it should be applied within exact settings. So, check out the Scotts spreader settings for the 10-10-10 fertilizer chart.
|Serial||10-10-10 Fertilizers||Settings||Amount of Application|
|1||Howard Johnson’s All Purpose Fertilizer 10-10-10||2.5 to 3||7 lbs/1000 sq. ft.|
|2||Parkers Super Soilife Lawn & Garden Fertilizer 10-10-10||3||10 lbs/1000 sq. ft.|
|3||10-10-10 All Purpose Fertilizer||3 or 4||10 lbs/1000 sq. ft.|
|4||Crabgrass Preventer Fertilizer 10-10-10||3.5 or 4||–|
|5||Weed & Feed Fertilizer 10-10-10||4||–|
|6||Lawn Food 10-10-10||3.5||5 lbs/1000 sq. ft.|
Scotts Spreader Settings For 13-13-13 Fertilizer
13-13-13 fertilizers are considered a step ahead take care for lawn soil or garden soil. But, they should be provided within limitation by following the exact settings.
So, check out the chart to get them.
|1||Scotts Precise Drop||9.5|
|2||Scotts EdgeGuard Pro||9|
|4||Scotts Turf Builder||12|
|6||Scotts Deluxe EdgeGuard||12|
Scotts Spreader Settings for 4 lbs Per 1000 Sq. Ft.
Scotts spreader settings are so many and they tend to vary depending on the lawn size and how much you are spreading the product.
To calculate that easily, dive into the list of Scotts spreader settings for 4 lbs per 1000 sq. ft.
|2||Sulfate of Potash||5|
|3||Scotts Weed Preventer||4|
|4||Fine Grain Fertilizer||6|
|6||Flagship||5 or 6|
Scotts Spreader Settings for Overseeding
Overseeding is mostly seen when the lawn soil produces less grass than the spreaded seeds. Though you are overseeding, the settings are still needed.
To enjoy the desired conclusion, go with the following settings.
|1||Scotts EasyGreen Rotary||27|
|2||Scotts EverGreen Easy||5|
|4||Scotts Turf Builder||8|
How to Calibrate a Scotts Drop Spreader?
Calibrating a Scotts Drop spreader becomes unavoidable to ensure the similar amount of grass to fertilizer in every space.
If you are aware of how to do it, take notes of the steps:
• Reach the adjustment unit
• Make connection between the black plastic trigger and handlebars
• Align the shutoff bar with the calibration line
For a better concept of the procedure, let’s jump into the discussion.
Step 1: Reach the Adjustment Unit
Take a look at the handlebars for the adjustment unit and move it to number 6. Set the Scott’s drop spreader in a way to keep the handle touched on the ground and use hands to hold the drop spreader.
Step 2: Make Connection Between the Black Plastic Trigger and Handlebars
Use your foot and the gate will be opened to connect the handlebars and that trigger together. The more you depress the trigger, the sooner it will be engaged.
Step 3: Align the Shutoff Bar with the Calibration Line
The black calibration screw needs to be turned to complete the alignment. Keep adjusting or turning it and stop doing it as soon as you notice the calibration line is aligned with the shutoff bar.
Thus, the Scotts drop spreader is calibrated in this simple way.
How to Adjust Scotts Drop Spreader?
Adjusting a Scotts drop spreader is essential while you proceed to spread products with it. If it is not adjusted as recommended by the manufacturer, the spreading may not be well satisfactory.
Complete the adjustment of the Scotts drop spreader by following the process.
• Locate the shutoff bar and release the trigger control
• Set the micrometer range
• Change the settings according to the product’s need
Now, let me break the process in steps to assist you.
Step 1: Locate the Shutoff Bar and Release the Trigger Control
First, you have to close the hopper of the Scotts drop spreader and it is the component that carries the seeds or products.
To do it, locate the shutoff bar and the black plastic trigger control is near it. You have to release the trigger control and it will let the shutoff bar set in its position. Then, the hopper will be closed.
Step 2: Set the Micrometer Range
At this point, the micrometer range demands to be set and do it in its setting barrel. Use your fingers in rotating it until you meet the serial number 6.
Now, press the black plastic trigger control ensuring it is going opposite of the handle of the spreader. Make sure the calibration line is in touch with the shutoff bar.
Step 3: Change the Settings According to the Product’s Need
Finally, you can change the micrometer’s settings according to the product’s need. The packaging of each product comes with their recommended settings.
As soon as you set the micrometer, the hopper will be opened and you can start spreading with the Scotts drop spreader.
Detailed Talk: Scotts Spreader Settings Conversion Chart
What kind of spreader do you own?
The answer affects a lot in the case of the Scotts spreader settings conversion chart. Another question is regarding your lawn type.
No matter if you are fertilizing or spreading seeds, you have to maintain the conversion chart. That’s why I have come with an elaborated discussion to assist you.
So, how about we learn them together?
1. Scotts Drop Spreader
Scotts drop spreader is an excellent way to maintain fertilizing or spreading seeds in your medium sized lawn. It is because drop spreader settings remain below nine and it indicates the lawn size.
In case you are about to mow the grass at a limited level and feed them, you should set the settings to number 5. In this way, per square meter will get 30 grams of fertilizer or seeds.
Organic choice lawn food and evergreen autumn has the same setting number 7.5. It means per square meter will be benefited with 35 grams of product. 8.5 refers to 50 grams/square meter.
Switching to evergreen complete, you can go with setting number 6 to spread 35 grams per square meter. No wonder, the chart has set everything suitable for the particular lawn.
So, avoid adjusting the number compatible with smaller or bigger lawns.
2. Scotts Rotary Spreader
Is your lawn large and massive?
I guess you face an exhausting duration while spreading seeds or fertilizing your lawn or garden. For a broad and wide lawn, Scotts have a better solution.
Scotts rotary spreader is specifically made for an extensive garden or lawn. It works faster and will surely help you to get rid of the tiring job.
This spreader prefers the settings on number 26 to mow it less and cut and feed lawn food. The outcomes are also similar and they are 30g/square meter. Surprisingly, the task will be done faster.
As for evergreen complete and evergreen autumn, the settings are 27 and 28. But their outcome is similar and not weary at all.
Organic choice lawn food will require the settings to be at number 29.5 to 31.5. In this way, each square meter will be filled with 35 to 50 grams of product.
I can assume you are already planning to get it for your large lawn. No doubt, you will get better support to make your garden healthy.
3. Scotts Handy Spreader
The word ‘Handy’ is giving a vibe of the hand use of the spreader. Yeah, you caught it right. Scotts handy spreader is specifically made for hand use only.
As for its compatibility with the lawn size, a small lawn is perfect to be benefited with this spreader. As it is small and operated manually, it won’t perform well in medium or big lawns.
Most of its settings are already similar to each other and you have to set them at number 5. It will result in 30 to 35 or even 50. If your lawn is comparatively smaller, this one will be super handy to use.
You may think that it results the same as the other two spreaders, but I won’t suggest you use this one for every type of lawn. It is because this spreader will take a long duration to complete the task in a big or medium lawn.
Moreover, the job will be tiresome. Therefore, choose this one only if you have a tiny and simple lawn. Certainly, your lawn will have significant growth of grass or vegetables.
What to Do if I Want to Seed on With the Scotts Spreader?
Answer: Scotts set their compatible setting number for various purposes. In case you are spreading seeds for the first time in a new lawn, the setting should be set to 15. As for spreading seeds in an old lawn, setting 5 works better.
Why are the Numbers Put on Scotts Spreader Settings?
Answer: The numbers put on Scotts spreader settings are for assisting the user with the required amount of spreader. If you make a mistake and spread less or more fertilizer or seed, the growth won’t be satisfactory. Besides, the grass or vegetables can be harmed too. Therefore, the numbers are put on for safety.
What is the Process of Spreading Seeds Using Scotts EdgeGuard?
Answer: To spread seeds using Scotts EdgeGuard, go through the Scotts spreader settings conversion rate. Then, set the correct number on the rate control dial and put seeds in the spreader. Finally, start spreading the seeds.
No wonder, Scotts come with a variety of spreaders and settings. Luckily, the conversion chart comes with the spreader to assist us to fertilize as needed. Otherwise, we can make mistakes at any time.
Since you have learned a lot about Scotts spreader settings conversion chart, your garden or grass will let you live in a green surrounding.
Moreover, you can also choose the spreader considering the chart and your lawn area. See you later, buddy!