Are you confused about how to determine Scotts EdgeGuard spreader settings?
Well, Scotts have particular settings for each type of spreader including the EdgeGuard. And, the settings are also set according to the products.
But, how to use Scotts EdgeGuard spreader settings?
Start with knowing the settings for the product, fill the spreader with the amount, set the settings, and start walking with a balanced speed.
However, here you will meet the entire Scotts EdgeGuard spreader settings with the products name. Following it, your lawn may grow in your desired way.
So, let’s get into the article.
Universal Scotts Edgeguard Spreader Settings Chart
Using a Scotts EdgeGuard spreader shows the best outcome when you apply the products maintaining the correct settings. But, the settings vary depending on which product you are applying and how bigger is the lawn or land.
That’s why check out the following Scotts EdgeGuard spreader settings chart.
Serial | Purpose | Setting |
1 | Grass Seed | 8 or 9 |
2 | Fertilizer | 4.5 |
3 | Milorganite | 11.5 |
4 | Overseeding | 7.5 |
5 | Gypsum | 10 |
6 | Weed Killer | 5.25 |
7 | Bifen Granules | 2 or 3 |
Quick Overview: Scotts Edgeguard Spreader Settings
Before you know more of the settings, a list is given below with the products name, their respective settings rate and how much to apply per 1000 sq. ft.
Therefore, don’t miss the chance to use it while using the Scotts EdgeGuard spreader.
Serial | Products | Settings | Amount of Products |
1 | Prodiamine | 5.5 | 3 lbs/1000 sq. ft. |
2 | Dithiopyr | 6 | 4 lbs/100 sq. ft. |
3 | Starter Fertilizer | 5.25 | 3 lbs/1000 sq. ft. |
4 | Double Dark | 5.25 | 3 lbs/1000 sq. ft. |
5 | Flagship | 5.25 | 3 lbs/1000 sq. ft. |
6 | Stress Blend | 5.25 | 3 lbs/1000 sq. ft. |
7 | Freedom | 5.25 | 3 lbs/1000 sq. ft. |
8 | Sulfate of Potash | 3.25 | 2 lbs/1000 sq. ft. |
9 | Weed Control | 4.5 | 3 lbs/1000 sq. ft. |
10 | Andersons Humichar | 3.25 | 2 lbs/1000 sq. ft. |
Extended Discussion: Scotts EdgeGuard Spreader Settings
For the desired result from the garden or lawn, what we do not do! Spreading with a Scotts EdgeGuard spreader is a significant helping hand in this regard.
But, using it wrongly or setting an inaccurate setting of it can hamper the growth of the grass or garden plants. To get the best outcome, ensure the proper settings number of particular products.
So, get the Scotts EdgeGuard settings explained in the following discussion.
1. Prodiamine
The weed control Prodiamine has a strict spreader setting and the applying amount is set, too. Go with 3 lbs for each 1000 sq. ft of your area and set the spreader to 5.5.
2. Dithiopyr
For applying Dithiopyr, Scotts EdgeGuard settings per 1000 sq. ft. is 5 and the weight of it will be 4 lbs. Spreading more than that can burn the crabgrass and ornamental grasses.
3. Starter Fertilizer
To help the grass or plants get more nutrients from the Starter Fertilizer, switch the spreader to 5.25 with 3 lbs per 1000 sq. ft.
4. Double Dark
Double Dark is pretty popular for containing both iron and nitrogen. The soil gets them when Double Dark is applied 3 lbs for 1000 sq. ft. on 5.25 setting.
5. Flagship
No matter what type grasses your lawn has, apply the Flagship fertilizer by setting the Scotts EdgeGuard at 5.25. On this settinh, each 1000 sq. ft. will demand 3 lbs of it.
6. Stress Blend
The nutrients of Stress Blend fertilizer becomes effective when it is spread 3 lbs for a 1000 sq. ft. by maintaining 5.25 setting.
7. Freedom
Freedom Granular is much like the Stress Blend and requires the setting 5.25. Don’t cross 3 lbs for a 1000 sq. ft. lawn size.
8. Sulfate of Potash
Sulfate of Potash is highly recommend to be spread after putting the setting on 3.25. Be cautious to apply 2 lbs
9. Weed Control
While applying an average weed control, set the Scotts EdgeGuard spreader to 4.5 and put 3 lbs for 1000 sq. ft.
10. Andersons Humichar
To let the Andersons Humichar work effectively in your lawn, apply it 2 lbs for every 1000 sq. ft. The settings shouldn’t go up or down from 3.25.
What Do Numbers Mean on Scotts EdgeGuard Spreader?
Answer: The numbers on a Scotts EdgeGuard spreader is for applying the lawn products following these numbers. They let the product spread equally and avoid overspreading by setting these numbers.
What Setting is for Bifen Granules on a Scotts EdgeGuard Spreader?
Answer: While applying Bifen Granules, set the applying setting to 2 or 3 on a Scotts EdgeGuard spreader. Your walking speed can vary the applying rate as spreading differs depending on it.
Are All Scotts Spreader Settings the Same?
Answer: Yes, in most cases, all Scotts spreader settings are the same. Differences are seen while applying the products as their applying rate is diverse in each Scotts spreader.
End Words
On the whole, I must tell you that not maintaining the Scotts EdgeGuard spreader settings can harm your entire lawn or garden. We know that excessive or less use of seeds or fertilizer is a way to destroy the lawn.
Therefore, follow the list and make sure to set the settings numbers matching with which product you are applying. To get more about it, check out Scotts edgeguard spreader parts diagram and Scotts spreader settings conversion chart.
Best wishes for your garden, buddy.