[Solved!] How to Reset RCA Universal Remote?

how to reset rca universal remote

When you program a RCA universal remote, you may think everything is done. And, you don’t need to do anything with the remote anymore. Well, that’s not the ending.

While using the remote, sometimes resetting it becomes a must. But, how to reset a RCA universal remote?

Two methods are known for being most effective in resetting a RCA universal remote. One of them is using the numerical button ‘1’ and the other one is using the power key.

Well, I am not putting an end only with this much info. Because a lot more is illustrated in the discussion about how to reset RCA universal remote.

So, why don’t you hurry to join?

Methods of Resetting RCA Universal Remote

Resetting a RCA universal remote indicates the remote is back to its previous state with zero connection with any device. It is indispensable when your programing has gone incorrect with wrong codes.

In some cases, you can realize the need for it after a certain period and that’s why the methods of resetting are elaborated in this segment.

Therefore, let’s jump in without further delay.

Method 1: Using the Numerical Button ‘1’

When your RCA universal remote starts malfunctioning, your first thought can be replacing it. But, I recommend resetting it rather than changing it as the reset one functions like a new one.

So, take a glance at a common way of resetting the remote that is detailed below.

Step 1: Reach the Remote Batteries and Take Them Out

First, reach the back side of the remote and take that cover out from the battery chamber. Then, remove the batteries and keep them aside.

Step 2: Tap On the Numerical Button ‘1’

While resetting, the microprocessor needs to be reset. Keeping that in mind, press the numerical button ‘1’ and hold it for at least 1 minute.

Step 3: Release and Wait

Release the key once you think 60 seconds have passed. At this point, wait for 10 to 15 seconds and do not press any other keys.

Step 4: Repeat the Steps

As you are resetting the microprocessor of the RCA universal remote, you have to repeat the steps a few times.

Step 5: Set the Batteries Back

Now, set the batteries back into their place and cover them up.

Step 6: Tap On Power Key and Check

Turn the power key on and off a couple of times and observe if the light appears or not. If it appears, the RCA universal remote is reset successfully.

Method 2: Using the ‘Power’ Key

The power of the ‘power’ key is immense undoubtedly as it is used in programing to resetting and in many cases.

So, check out the steps of this quicker method.

Step 1: Take the Batteries Out

The batteries on a RCA universal remote are located at its back part. Uncover the battery compartment and remove them.

Step 2: Pressurize the Power Button

Now, press the power key and continue doing it for 50 to 60 seconds.

Step 3: Release It and Wait

After releasing the key, do not tap on other keys for 20 to 30 seconds.

Step 4: Continue the Steps

To ensure the proper resetting of the remote’s memory, continue the steps for a few times.

Step 5: Place the Batteries

After that, place the batteries back in their compartment and set the cover. 

Step 6: Test the Remote with the Off/On Button

To test the remote’s resetting, press the on/off key in a row. The presence of the power light is an indication that the resetting process is completed.

When Do You Need to Reset a RCA Universal Remote?

Answer: When your RCA universal remote is showing any defects, resetting it becomes the only solution. In some cases, to get back the default settings, resetting works smartly. While programing another device, resetting is necessary.

Why is My RCA Universal Remote Blinking Red?

Answer: A RCA universal remote blinking red continuously is a sign of connection problems with the device. Check if something has come between them and barricade the signal. In some cases, the wrongly placed batteries can also let it happen.

The Verdict

In my opinion, resetting the remote allows it to work like before by erasing all internal glitches. Now that you went through the article, I guess you have learned how to reset RCA universal remote.

Following the steps one by one will ensure it is completed successfully. In case you have a plan to program the RCA universal remote, get the RCA universal remote codes as per your device brand.

Dale Carnegie

Hey! This is Dale Carnegie. I am a professional and expert in electrical work. From teenage till now, I found myself fascinated with the nitty-gritty installation and electrical works at home. Eventually, this led me to share about my journey and solve your electrical task of installing and maintaining power systems. With my experience and practice, I can guarantee you will get the best advice here. Stay tuned for more latest updates and sneak peeks of any electrical solutions for your home.

Recent Posts