A Lesco spreader is always recommended to be used by maintaining the specific settings. But, many of us forget them or get confused as too many settings are there for various lawn products.
However, what are Lesco spreader settings for lime, fertilizer and milorganite?
Spread lime at settings number 4, fertilizer at 14 and milorganite at 10 on a Lesco spreader.
In case you are a new user of Lesco spreader, you must have the Lesco spreader settings conversion chart. Without this, your lawn products may get over spreaded or less spread than the lawn demands.
So, let’s not waste time and get started.
Quick Overview: Lesco Spreader Settings Conversion Chart
Having a Lesco spreader settings conversion chart is a better way to handle the spreader while applying the products.
For that reason, check out the chart for further use.
|Serial||Products||Settings||Amount of Product|
|2||Prodiamine||14||3 lbs/1000 sq. ft.|
|3||Pro Mix Green and Feed Lawn Fertilizer 36-012||10||1.35 lbs/1000 sq. ft.|
|4||Flagship 24-0-06||14||3 lbs/1000 sq. ft.|
|5||Pro Mix Heal and Feed Lawn Fertilizer 20-0-05||14||4.5 lbs/1000 sq. ft.|
|6||Dithiopyr||16||4 lbs/1000 sq. ft.|
|8||Stress Blend 07-0-20||16||4 lbs/1000 sq. ft.|
|10||Starter Fertilizer 12-12-12||14||3 lbs/1000 sq. ft.|
Try to Implement: Lesco Spreader Settings Conversion Chart
Carrying the Lesco spreader settings conversion chart at the time of spreading is a wise move for the lawn or garden. But, you can make mistakes in keeping the dial at the correct number.
Keeping that in mind, this part is fraught with the info of the settings chart. Therefore, do not miss the chance to take a glance at it.
1. Grass Seeds
For seeding your lawn, using a Lesco spreader will demand the settings to be at 10. This is an average setting and according to the grass type, the number can go a little bit up or down.
Only the seeds won’t grow the grass properly and fertilizing them is required. Set the Lesco spreader dial at 14 for 3 lbs of fertilizer for every 1000 sq. ft.
Lack of lime is a significant barrier for the grass to grow. And, while adding lime to the soil, do not go above the settings number 4.
Milorganite is another important product after seeding the grass. It needs the settings number 8 or 10 or 12 depending on how big your lawn is.
5. Lawn Food
The need for lawn food for growing grass is unavoidable. But, it should be within the recommended amount and settings. For example, pro mix green and feed should be spread at 10 for 1.35 lbs/1000 sq. ft.
What are the Dimensions of a Lesco Spreader?
Answer: A Lesco spreader is designed with a length of 48 inches, 25 inches of width and 35 inches of height. The weight of it is 42 lbs and made with stainless steel for a better lifespan. The hopper can carry 80 lbs of lawn products easily.
How Do You Maintain a Lesco Spreader?
Answer: Maintaining a Lesco spreader is pretty effortless as you just have to keep it clean. After using it everytime, clean it properly with water and let it dry thoroughly. Then, wipe it well to erase all moisture to avoid rust on it.
The beauty of your lawn depends largely on how you are seeding and feeding it on time. The biggest factor is maintaining the need of the by using a Lesco spreader that has an excellent feature.
Lesco spreader settings conversion chart is that feature that lets you feed the lawn accordingly. Because the chart shows the exact settings rate for every particular lawn product. So, save it for later, buddy.