Owning a John Deere STX38 is fun along with relief till its parts don’t meet you with issues. If you proceed to solve that while taking zero idea of the components, no changes will happen rather than more troubles.
But, what are the important parts of the John Deere STX38?
The important ones are fuel filter, fuel tank, carburetor hose, filler cap, heat shield, bulk hose, fuel shut off solenoid, and fastener grommet.
To locate the parts accurately, John Deere STX38 parts diagram is elaborated here with the introduction of each unit.
So, don’t go anywhere and stick to the article.
What Shouldn’t You Miss Before the Diagram?
Though you will get the diagram with the knowledge of each corner, a few ideas are here that you should not miss. They will let you understand the John Deere STX38 lawn tractor in a better way.
Therefore, to enhance your view regarding the tractor, let me break them down.
• Fuel Type: Gasoline
• Starter: Electric
• Displacement: 12.5 HP (3,350 RPM)
• Cylinders: 1
• Oil Capacity: 1.9 Litre
• Fuel Tank Capacity: 4.7 Litre
• Battery Power: 12V
• Transmission Type: Belt driven gear
• Chassis: 4×2 (2WD)
• Gears: 1 reverse and 5 forward
• Length: 59.8 Inches
• Width: 52 Inches
• Height: 38.6 Inches
• Weight: 196 Kg
Undoubtedly, the John Deere STX38 has a bunch of appreciative features. However, let’s step ahead to look at its parts diagram to gather more info.
John Deere STX38 Parts Diagram with Details
Anywhere in your John Deere STX38, problems can make their home and spread from there to other units like a locality. It occurs when your ideas regarding the tractor parts are at zero level.
To get you out of this situation, the John Deere STX38 parts diagram is given below with details. Do check it before you proceed to troubleshoot the tractor.
At the top of the diagram, the dash panel is set with clip nuts and screws. Fastener grommets and screws set it on the fuel tank. The tank has a mandatory filler cap and an optional one with a gauge.
Through hose clamps, two bulk hoses are connected with the tank and with the fuel shut off solenoid valve. Just beside the valve, more bulk hoses connect the fuel filter and the carburetor hose.
The RH heat shield is placed with flange nut and cap screws and another shield is the LH one. To set the pedestal, cap screws, bushing and flange nuts are used.
After the diagram, I guess you are already sure about where the parts are placed. But, there is still a lot left and you should know what components are for what purpose.
Scroll below to go through the John Deere STX38 parts list and their niceties.
1. Filler Cap
A filler cap plays the role of sealing the way of entering fuel in the fuel tank.
2. Fuel Tank
To keep the fuel away from air and maintain its cleanliness, the fuel tank is essential.
3. Bulk Hose
The bulk hose is for transferring fuel through it.
4. Fuel Filter
The fuel filter lets fuel go through its filter and catches the dirt, and debris.
5. Fastener Grommet
For covering the uneven or sharp holes of the fuel tank, fastener grommets are used.
6. Carburetor Hose
A carburetor hose lets the mixture of air and fuel flow through it.
7. Heat Shield
A heat shield is to protect the fuel tank from the heat of the exhaust unit.
8. Fuel Shut Off Solenoid Valve
This valve understands when is the correct moment to stop the fuel flow for the mower.
What Engine is in a John Deere STX38?
Answer: A John Deere STX38 lawn tractor is equipped with a Kohler CV12.5-1215 engine.
How Much Oil Does a John Deere STX38 Take?
Answer: A John Deere STX38 demands 2 quarts of oil. However, the oil type depends mostly on temperature.
In my opinion, everything has been said and your concept seems to be enriched with your required details.
Having a John Deere STX38 parts diagram is the first and foremost tool in troubleshooting the tractor. In this way, you won’t lose the way to fix any issues let alone being unfamiliar with the lawn tractor units.