[Try it!] Husqvarna Zero Turn Mower One Side Not Working?


husqvarna zero turn mower one side not working

One of the most common Husqvarna zero turn mower problems is one side that doesn’t work or move. Talking about it, I can recall my experience of my Husqvarna zero turn mower.

But, have you ever thought of why does a Husqvarna zero turn mower one side not working?

It is because of the issues in brake, clogged steering arms, wrong tire pressure, faults in dampers, and damaged drive belts.

Luckily, you landed on the right place that has everything of the Husqvarna zero turn mower one side not working including the fixes.

So, let’s get started.

Quick Overview: Husqvarna Zero Turn Mower One Side Not Working?

I have picked the possible reasons and the smart solutions of them and they are illustrated on the following chart.

Serial            Reasons                        Fixes
1Issues in the brakeReplace the defective brake
2Clogged steering armsClean the bolts and lubricate them
3Wrong tire pressureBalance the equal pressure
4Faults in dampersInstall new dampers
5Damaged drive beltsChange the drive belts

Precious Discussion: Husqvarna Zero Turn Mower One Side Not Working?

Though everything in the Husqvarna zero turn mower is working, one side with no response creates a great hassle. At that point, you can not do anything with the mower.

Therefore, I have discussed why it occurs and how you can solve it in this part.

So, why don’t you take a glance at them?

Reason 1: Issues In Brake

The brake of one side may not function and it is a common cause to bring the issue. A defective brake is not at all compatible to move the mower.

When the brake calliper gets stuck with the piston, it can not move anyhow. Gradually, the brake is also affected and results in the not working situation of that side.

Solution: Replace the Defective Brake

As soon as you find the brake defective, you shouldn’t wait any longer than replacing the brake. Also, release the brake calliper by loosening the piston. 

Reason 2: Clogged Steering Arms

Husqvarna zero turn steering problems can affect the movement or workability of one side. And, a clogged steering arm is the most common one to affect the mower.

When the bolts of the steering arms get jammed due to dirt and debris, they make it harder to move the steering arms. As a result, the malfunctioning of it has influence on a side only.

Solution: Clean the Bolts and Lubricate Them

First, you should get access to the bolts of the steering arms and clean them thoroughly. In case they are out of lubrication oil, put in as much as needed.

Reason 3: Wrong Tire Pressure

Every tire of the Husqvarna zero turn mower has a separate responsibility and that’s why the pressure on them should be equal.

But, if you forget to maintain that, one tire may seem to work. But, the other one with less or excessive pressure won’t be able to move.

Solution: Balance the Equal Pressure

To get your Husqvarna zero turn mower out of this trouble, you have to check the pressure on each tire. Then, balance the pressure on them equally. Ignoring this one can take the mower to bigger barriers.

Reason 4: Faults in Dampers

Faults in the dampers are quite responsible for letting one side of the Husqvarna zero turn mower not work.

Because, when the dampers on a side do not respond or function, the deck of that side doesn’t move at all. And, for this reason, you experience that side just sits idle.

Solution: Install New Dampers

After catching the dampers faulty, I don’t recommend using them with repairing. Because it will cost more and no changes in function will be seen. So, install new dampers for a longtime use.

Reason 5: Damaged Drive Belts

I guess you know that the drive belts of a Husqvarna zero turn mower guide it to move ahead. Well, sad but the truth is a damaged drive belt can bring many issues for the mower.

One of them is that a particular side of the mower is not working because the belt may start malfunctioning.

Solution: Change the Drive Belts

I prefer inspecting the drive belts to see if their damages are severe or not. In case of the losing position, you can secure them easily. But, serious damages demand the belts to be changed.

What Kind of Hydraulic Fluid Does a Husqvarna Zero Turn Mower Use?

Answer: Use 15W-50 synthetic motor oil for a Husqvarna zero turn mower. Also, 20W-50 motor oil is recommended for the mower. Both the oil has the compatibility to run the engine.

Why is My Husqvarna Zero Turn Mower Not Working on One Side?

Answer: A Husqvarna zero turn mower’s one side doesn’t work when the steering arms get clogged, tire pressure is imbalanced, steering dampers in bad state, and also for low hydraulic fluid level.

End Note

On the whole, I always suggest everyone to run the Husqvarna zero turn mower according to the recommended manners. Following that along with the maintenance, no such issues can attack the mower.

However, to fix the Husqvarna zero turn mower one side not working, make sure to go through each remedy.

Scott McFadden

Hi! It's Scott McFadden. I'm obsessed with farming. All my life I grew up around my grandfather and his farmhouse. I cannot put in words how they inspired me to farm. From taking care of cows to looking after our gardens I have learned a lot. It would be a real pleasure if I get to share this with you.

Recent Posts